Machine & Power Tool Accessories
-
Formula 2050 Blade & Bit Cleaner - 18 oz
CMT® Formula 2050 Blade and Bit Cleaner keeps blades, bits and other tools clean for a longer tool life and better performance. Just wet the surface, allow a few minutes to penetrate, and wipe off the build-up. Easily removes resin, gum and pitch without...- $5.10
$16.99- $5.10
- Unit price
- per
-
Vari-Grind Fingernail Side Grinding Jig
When turning coves, beads and other fine details, nothing beats a sharp fingernail profiled spindle gouge. For rapid internal hollowing or fast smooth external cuts on a bowl, nothing beats a side grind. However, because of the difficulty in producing these edges (both require...- $19.50
$64.99- $19.50
- Unit price
- per
-
SlickKote Anti-Friction Coating - Aerosol - 11 oz
Quality Aerosols® SlickKote is a dry lubricating film that, when applied to metal surfaces, bonds to metal to create a super slick surface. When used on table saw tables and woodworking equipment in general, wood moves freely across the surface, as well as wood...- $4.80
$15.99- $4.80
- Unit price
- per
-
Binding Post Interchangeable Tip Pen (BPH)
The best interchangeable-tip pen in the world! Before the Razertip® BPH, an interchangeable-tip pen meant a compromise: either it used a wire-and-post system or you had to buy an expensive tip with a special molded plug that was not rigid enough for precision work....- $10.50
$34.99- $10.50
- Unit price
- per
-
Dado Brake Cartridge - 8"
The revolutionary SawStop protection starts here! This SawStop Brake Cartridge for 8" dado blades fits all models of SawStop table saws, except older industrial models. Current SawStop models use cartridges with blue tinted plastic cases and 9-pin connectors. If you have an older model...- $41.70
$139.00- $41.70
- Unit price
- per
-
Resaw King Bandsaw Blade - 115" x 3/4" x .024" x Variable TPI
The Laguna Resaw King Bandsaw Blade delivers unmatched precision, smoothness, and longevity for serious woodworkers. Designed with premium carbide-tipped teeth and a variable TPI configuration, this blade produces glass-smooth cuts with minimal waste and virtually no sanding required. Ideal for resawing hardwoods, veneers, and...- $54.00
$179.99- $54.00
- Unit price
- per
-
Drill Press Table with Standard Fence
WoodRiver® Drill Press Table features a large tabletop constructed of a MDF core covered with matte black laminate. Tear-out is all but eliminated when drilling into the square replaceable insert. Back-to-Back T-Track is bolted to the tabletop rather than screwed, so that accessories can...- $43.50
$144.99- $43.50
- Unit price
- per
-
Standard 10" Brake Cartridge
This is the standard SawStop brake cartridge for 10" saw blades. It replaces the TSBC-10R2 and is compatible will all models of SawStop except the CB Model Saws that use TSBC-10L.Features: Standard SawStop brake cartridge for 10" saw blades Fits all models of SawStop...- $35.70
$119.00- $35.70
- Unit price
- per
-
Professional Series 36" Extension Table
Complete your SawStop 52" Professional In-Line Router Table configuration with this Professional Series 36" Extension Table for a perfect fit when installed between the rails. It’s compatible with the SawStop Professional Cabinet Saw with 52" rip capacity and a SawStop RT Router Table installed...- $44.70
$149.00- $44.70
- Unit price
- per
-
Single Roller Work Support Stand
The WoodRiver® Single Roller Work Support Stand provides you with support when and where you need it. The polished steel roller works with a multitude of machines and other work surfaces. The height of the stand can easily be adjusted to meet your work...- $11.70
$38.99- $11.70
- Unit price
- per
-
Clear-Cut TS™ Stock Guides for Table Saws
JessEm Clear-Cut TS™ Stock Guides for Table Saws are the ultimate hold-down on the table saw. Multiple featherboards are required to simultaneously hold down and guide material accurately against a table saw fence. Clear-Cut TS Stock Guides operate on the same principle as a...- $102.00
$339.99- $102.00
- Unit price
- per
-
Dado Lock Down Insert
This insert can be used on all SawStop Table Saws using 8" dado blades. Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and...- $22.50
$75.00- $22.50
- Unit price
- per
-
Wolverine Grinding Jig
Wolverine Grinding Jig will save you time, frustration and money by allowing you to grind tools right the first time and every time. You'll create accurate cutting angles and straight edges in a fraction of the time it now takes and your tools will...- $31.20
$103.99- $31.20
- Unit price
- per
-
Blue Ion™ 6.0Ah Battery Pack - 20V
Kreg 20V Blue Ion™ 6.0Ah Battery Pack (BATT6B) delivers the extended runtime and dependable power serious woodworkers demand. Designed for Kreg® 20V Ionic Drive™ tools, this high-capacity battery keeps you working longer with fewer interruptions, while smart electronics protect performance and battery life.Built tough...- $45.00
$149.99- $45.00
- Unit price
- per
-
BlueIon™ Super Charger - 20V
The Kreg CRGR801B – Kreg 20V BlueIon™ Super Charger is built for ultimate efficiency, delivering rapid, intelligent charging that keeps your Kreg tools powered and your projects moving. Designed to minimize downtime, this high‑performance charger powers a 4.0Ah battery up to four times faster...- $24.00
$79.99- $24.00
- Unit price
- per
-
Closed Stand for 5315.001 Sander
The Oliver Machinery Closed Stand for the 5315.001 Sander, Model 5315.A001 is designed to provide a stable, dedicated base for Oliver’s 15" wide belt sanding machine. It is built for woodworkers who want a fixed, organized setup that supports consistent sanding results without sacrificing...- $195.00
$649.99- $195.00
- Unit price
- per
-
Diamond Saw Blade LAMINATE/HPL DIA 160 x 1.8 x 20 F/FA28
The Festool Diamond Saw Blade LAMINATE/HPL DIA 160 x 1.8 x 20 F/FA28 is engineered for cutting extremely hard and abrasive materials that quickly wear out standard carbide blades. Designed for use with Festool track saws, it delivers controlled, accurate cuts while maintaining edge...- $89.70
$299.00- $89.70
- Unit price
- per
-
Diamond Saw Blade LAMINATE/HPL DIA 168 x 1.8 x 20 F/FA28
The Festool Diamond Saw Blade LAMINATE/HPL DIA 168 x 1.8 x 20 F/FA28 is built for cutting extremely hard and abrasive materials that rapidly degrade standard carbide blades. Designed for Festool track saw systems, it delivers stable cutting behavior and clean edges across materials...- $89.70
$299.00- $89.70
- Unit price
- per
-
Cordless Modular Edge Router MFKC 700 EB‑Basic
Festool Parallel Side Fence PA-HLC 82/EHL 65 gives your planer a stable edge reference when you need consistent rabbets and straight tracking near an edge. It is built for woodworkers who want repeatable results from their cordless planer setup without drifting off line mid-pass....- $8.70
$29.00- $8.70
- Unit price
- per
-
Stronghold Chuck Key
The Stronghold Chuck Key serves as a replacement for a lost or worn key for ONEWAY Stronghold chucks. It features smooth single-handed operation and gear teeth designed to engage cleanly with the chuck’s hardened scroll ring. This secure engagement prevents skipping under load and...- $16.20
$53.99- $16.20
- Unit price
- per
