Festool
-
Router OF 1400 EQ‑F‑Plus
The Festool Router OF 1400 EQ‑F‑Plus delivers high routing power in a balanced, highly controllable platform designed for precise, repeatable results. With 1400 watts of output in a tool weighing under 10 pounds, it covers a wide range of routing tasks while remaining easy...- $239.70
$799.00- $239.70
- Unit price
- per
-
Drywall Sander PLANEX Easy LHS‑E 225 EQ‑CB
The Festool Drywall Sander PLANEX Easy LHS‑E 225 EQ‑CB simplifies drywall sanding with a lightweight, single‑piece design that is ready to work straight out of the box. Built for consistent surface finishing with less effort, it combines intuitive controls with excellent balance to reduce...- $209.70
$699.00- $209.70
- Unit price
- per
-
Impact Driver and Drill Set TID 18 Basic‑Set TPC 18/4
The Festool Impact Driver and Drill Set TID 18 Basic‑Set TPC 18/4 combines high‑torque fastening with powerful drilling and hammer drilling capability in a compact, system‑ready package. This set pairs the TID 18 cordless impact driver with the TPC 18 QUADRIVE cordless percussion drill...- $149.70
$499.00- $149.70
- Unit price
- per
-
Roundover Bit HW R3‑OFK 500 Z1
The Festool Roundover Bit HW R3‑OFK 500 Z1 is designed for clean, controlled edge profiling on small and delicate workpieces. It is optimized for use with the OFKC 500 cordless edge router, delivering smooth, consistent round‑over results on solid wood and plastic edge banding...- $13.50
$45.00- $13.50
- Unit price
- per
-
Edge Trimming Cutter D22/8 OFK
The Festool Edge Trimming Cutter HW/KLS D22/8‑OFK is built for fast, accurate flush trimming of edge banding on both solid wood and plastic materials. It delivers clean edges with minimal setup time and consistent control at the router. The collet‑free hollow‑shaft design mounts directly...- $23.70
$79.00- $23.70
- Unit price
- per
-
Rabbet Depth Stop
The Festool Rabbet Depth Stop pairs with the Festool HLC 82 cordless planer for precise rabbet depth control. It allows you to set a defined depth before planing, so material removal stops exactly where you want it, reducing rework and helping maintain consistency across...- $8.70
$29.00- $8.70
- Unit price
- per
-
Roundover 2 Cutter - 3/16" (5 mm)
The Festool 3/16" Roundover Bit HW R5‑OFK 500 is built for controlled edge profiling on solid wood and plastic edge banding using the Festool OFK 500 trim router. It produces a smooth R5 round‑over that softens edges evenly while maintaining a consistent profile across...- $17.70
$59.00- $17.70
- Unit price
- per
-
Chamfer Guide Base
The Festool Chamfer Adaptor FNS-HLC 82 adds controlled chamfering capability to the HLC 82 cordless planer, allowing you to break edges consistently without switching tools. It mounts directly to the planer and provides a stable reference surface that keeps chamfers even and predictable across...- $14.70
$49.00- $14.70
- Unit price
- per
-
Roundover 2 Cutter - 1/8" (3 mm)
The 1/8" Festool Roundover Bit HW R3‑OFK 500 is designed for controlled edge profiling on solid wood and plastic edge banding using the Festool OFK 500 trim router. It cuts a smooth R3 round‑over that softens edges cleanly and leaves a consistent finished profile...- $17.70
$59.00- $17.70
- Unit price
- per
-
Roundover Bit HW R1‑OFK 500 Z1
The Festool Roundover Bit HW R1‑OFK 500 Z1 is designed for clean, controlled edge profiling on small and delicate workpieces using the OFKC 500 cordless edge router. Its single‑cutter design helps manage heat buildup during routing, producing smooth, consistent round‑over edges with minimal surface...- $13.50
$45.00- $13.50
- Unit price
- per
-
Battery Packs with TLC6 Rapid Charger 18 Li 5.0 HP‑ASI
The Festool Energy Set 18 2xHP5.0/TCL 6 delivers dependable, high‑output power for getting started with Festool cordless tools or expanding an existing 18V system. Built around proven Li‑HighPower battery technology, this set balances strong runtime, fast charging, and everyday versatility in a compact, ready‑to‑work...- $56.70
$189.00- $56.70
- Unit price
- per
-
Roundover 2 Cutter - 15/32" (4 mm)
The Festool 15/32" Roundover Bit HW R4‑OFK 500 is designed for clean, controlled edge profiling on solid wood and plastic edge banding using the OFK 500 trim router. It produces a smooth R4 round‑over that softens edges evenly while maintaining a consistent profile across...- $17.70
$59.00- $17.70
- Unit price
- per
-
Interface pad IP D220-LHS 2 225-SW
Festool Interface Pad IP D220-LHS 2 225-SW (578916) for PLANEX LHS 2 Long-Reach Sanders The Festool Interface Pad IP D220-LHS 2 225-SW is built for woodworkers and finishers who need consistent surface control when sanding soft compounds. Designed for use with PLANEX LHS 2...- $8.70
$29.00- $8.70
- Unit price
- per
-
Chamfer Cutter - 45 Degree - OFKC
The Festool Chamfer Cutter delivers clean, consistent bevels with a trim router. Designed to cut a precise 45° chamfer, it produces smooth, uniform results on solid wood and plastic edge banding where accuracy at the edge matters. This cutter mounts directly onto the Festool...- $17.70
$59.00- $17.70
- Unit price
- per
-
Bearing Guide D 15.8 OFKC
Festool Bearing Guide KLS-D 15,8-OFK delivers smooth, accurate flush trimming by providing a consistent reference point for clean, controlled routing along workpiece edges. Designed as a direct replacement bearing, it installs easily and keeps your trim work precise. Features Precision-machined steel for smooth, reliable...- $8.70
$29.00- $8.70
- Unit price
- per
-
Roundover 2 Cutter - 3/32" (2 mm)
The Festool 3/32" Roundover Bit HW R2‑OFK 500 is built for controlled, accurate edge profiling on solid wood and plastic edge banding using the OFK 500 trim router. It cuts a smooth, consistent round‑over that cleans up sharp edges and leaves a uniform finished...- $17.70
$59.00- $17.70
- Unit price
- per
-
Battery Packs with TCL 6 DUO Rapid Charger 18 4xHP5/TCL6DUO
The Festool Energy Set SYS 18 4xHP5/TCL6DUO provides a complete, high‑output power solution for expanding a Festool cordless system or equipping Festool Basic tools with dependable runtime. Designed for demanding shop and jobsite use, this set delivers sustained performance, fast charging and organized storage...- $113.40
$378.00- $113.40
- Unit price
- per
-
DFC 500 E Cordless DOMINO Joining Machine
The Festool DFC 500 E Cordless DOMINO Joining Machine combines the strength of traditional mortise and tenon joinery with the speed and flexibility of modern loose‑tenon construction. Designed for woodworkers who rely on repeatable alignment and joint stability, it delivers consistent results without the...- $383.70
$1,279.00- $383.70
- Unit price
- per
-
Roundover 2 Cutter - 1/4" (6 mm)
The Festool ¼" Roundover Bit HW R6‑OFK 500 is built for controlled, accurate edge rounding on solid wood and plastic edge banding. Designed for use with Festool trim routers, this bit delivers a smooth, consistent round‑over on small parts and detailed work where precision...- $17.70
$59.00- $17.70
- Unit price
- per
-
HLC 82 Basic Cordless Planer
The Festool Cordless Planer HLC 82 EB-F-Basic delivers clean, controlled planing without the limits of a power cord. It combines a spiral cutterhead with precise depth control to produce smooth results while reducing noise and tear-out. Its single-knife helical cutterhead shears the material instead...- $134.70
$449.00- $134.70
- Unit price
- per
