Specials New Items
-
VAC-PUC Vacuum Powered Holding Device - 2 Piece
The VAC‑PUCs are negative‑pressure holding devices designed to mount directly to a work surface for versatile, obstruction‑free work holding. By securing materials without clamps in the work area, they help streamline layout, machining, and routing operations where clear access to the workpiece is important....- $39.00
$129.99- $39.00
- Unit price
- per
-
Draw File - Half-Round - Medium Cut
The Iwasaki Draw File Half‑Round Medium Cut is built for controlled smoothing and fine shaping using a pull stroke rather than a push. With an overall length just over 8" and grips at both ends, it is guided with two hands while the exposed...- $7.50
$24.99- $7.50
- Unit price
- per
-
Draw File - Flat - Medium Cut
The Iwasaki Draw File Flat Medium Cut is designed for controlled smoothing and fine shaping where surface quality matters as much as accuracy. Used by pulling the file toward the user, it offers more feedback and control than a traditional push file, making it...- $7.50
$24.99- $7.50
- Unit price
- per
-
RED TAIL Ruler Set
The RED TAIL Ruler Set includes three precision rulers in 4", 6", and 12" lengths designed to support accurate measuring, marking, and layout tasks. Built for versatility, each ruler is interchangeable with other Swan Tool Group layout tools, allowing users to configure their measuring...- $12.00
$39.99- $12.00
- Unit price
- per
-
Draw File - Half-Round - Bastard Cut
The Iwasaki Draw File Half‑Round Bastard Cut is designed for controlled wood shaping using a pull stroke rather than a push. As you draw the file toward the body, it provides direct feedback and steady control when removing material during fitting, tuning and general...- $7.50
$24.99- $7.50
- Unit price
- per
-
20V Ionic Drive™ Wet/Dry Vac HEPA Replacement Filter
Kreg 20V Ionic Drive™ Wet/Dry Vac HEPA Replacement Filter keeps your vacuum performing at peak efficiency with high‑efficiency filtration designed specifically for the Ionic Drive Wet/Dry Vac with HEPA. This genuine replacement filter captures 99.97% of airborne particles 0.3 microns and larger, helping reduce...- $4.50
$14.99- $4.50
- Unit price
- per
-
Spiral Blade - Replacement for HLC 82 Spiral Cutterhead
The Festool Spiral Blade HW 82 SD HLC 82 is a direct replacement blade for the HLC 82 spiral cutterhead, built to restore clean, controlled planing with minimal interruption. Consistently delivering superior cuts, this blade maintains the cutterhead’s shear‑cutting action for smoother output and...- $13.50
$45.00- $13.50
- Unit price
- per
-
Bearing Guide D22 OFK
The Festool Bearing Guide KLS‑D22‑OFK is a replacement bearing designed to restore clean, controlled flush trimming when working with the HW D 22/8‑OFK edge trimming router bit. It provides a stable reference surface that keeps the cutter aligned tight to the workpiece edge, reducing...- $8.70
$29.00- $8.70
- Unit price
- per
-
9' x 108" Industrial Edge Sander - Model 6318.001
The 9” x 108” Oscillating Edge Sander by Oliver Machinery gives woodworkers the surface control and material removal needed for accurate edge sanding on large parts. With a full 9” x 108” oscillating belt and 3 HP motor, this machine maintains consistent contact across...- $1,320.00
$4,399.99- $1,320.00
- Unit price
- per
-
Little Wizard 2.5 Woodworking Metal Detector
The Little Wizard 2.5 is a handheld metal detector designed specifically for woodworkers who work with reclaimed or unknown stock. It locates hidden nails, screws and other metal before they reach cutting edges, reducing the risk of damaged blades and interrupted work. Its compact...- $11.99
$39.95- $11.99
- Unit price
- per
-
Ionic Drive 3/8” Compact Impact Wrench - 20V With 2AH Battery and Charger Kit
Kreg 20V Ionic Drive™ 3/8" Compact Impact Wrench delivers impressive power and precision in a lightweight, easy-to-handle design built for serious shop and jobsite work. With up to 275 ft-lbs of breakaway torque and four selectable speed modes—including smart Assist Mode—this compact impact wrench...- $39.00
$129.99- $39.00
- Unit price
- per
-
51" Replacement Flex Shaft Kit for GM150-UT
Replacement Flex Shaft Kit for the BRAVOPRODIGY GM150‑UT Ultra Flex Shaft Tool (#198333) restores smooth power transfer and control when the original shaft assembly wears out. It is intended for woodworkers and makers who rely on consistent flex shaft performance from their GM150‑UT system...- $16.50
$54.99- $16.50
- Unit price
- per
-
Impact Driver and Drill Set TID 18 Basic‑Set T18
The Festool Impact Driver and Drill Set TID 18 Basic‑Set T18 pairs two of the most frequently used fastening tools into a compact, system‑ready kit designed for efficient shop and jobsite workflows. Combining the TID 18 cordless impact driver with the T18+3 cordless drill,...- $134.70
$449.00- $134.70
- Unit price
- per
-
Brazilian Cherry/Jatoba - 3/4" x 3" x 24"
Brazilian Cherry (Hymenaea courbaril), also known as Jatoba, can vary in color from a lighter orange-brown to a darker reddish-brown, which tends to become darker with age. The grain tends to be wavy and interlocked much like Mahogany. Brazilian Cherry glues, stains and finishes...- $4.50
$14.99- $4.50
- Unit price
- per
-
Draw File - Flat - Bastard Cut
The Iwasaki Draw File Bastard Cut works more like a small drawknife than a traditional file, giving woodworkers direct control over material removal by pulling the cutting surface toward the body. With an overall length just over 8" and blue grips at both ends,...- $7.50
$24.99- $7.50
- Unit price
- per
-
Blue Ion™ 8.0Ah Battery Pack - 20V
Kreg 20V Blue Ion™ 8.0Ah Battery Pack (BATT8B) delivers extended runtime and dependable power for Kreg® 20V Ionic Drive™ tools, keeping you productive through long, demanding projects. Designed for durability and performance, this high-capacity battery features smart charging, advanced heat management, and rugged drop...- $51.00
$169.99- $51.00
- Unit price
- per
-
Router OF 1400 EQ‑F‑Plus
The Festool Router OF 1400 EQ‑F‑Plus delivers high routing power in a balanced, highly controllable platform designed for precise, repeatable results. With 1400 watts of output in a tool weighing under 10 pounds, it covers a wide range of routing tasks while remaining easy...- $239.70
$799.00- $239.70
- Unit price
- per
-
Junior/Senior Bench
The Sjöbergs Junior/Senior Workbench delivers a stable, space‑efficient work surface that adapts to different users through a simple height‑adjustable base system. Designed for woodworkers who need a compact bench without giving up core workholding capability, it fits comfortably in smaller shops while supporting real...- $162.00
$539.99- $162.00
- Unit price
- per
-
Lathe Buffing System
The WoodRiver® Lathe Buffing System is a two-step buffing setup for turners who want a beautiful, mirror-like finish on projects made of acrylic, poly resin and more. Once mounted on the lathe, the precision-machined components ensure smooth, balanced operation, while aluminum spacers keep the...- $15.00
$49.99- $15.00
- Unit price
- per
-
Drywall Sander PLANEX Easy LHS‑E 225 EQ‑CB
The Festool Drywall Sander PLANEX Easy LHS‑E 225 EQ‑CB simplifies drywall sanding with a lightweight, single‑piece design that is ready to work straight out of the box. Built for consistent surface finishing with less effort, it combines intuitive controls with excellent balance to reduce...- $209.70
$699.00- $209.70
- Unit price
- per
