Specials New Items
-
Impact Driver and Drill Set TID 18 Basic‑Set TPC 18/4
The Festool Impact Driver and Drill Set TID 18 Basic‑Set TPC 18/4 combines high‑torque fastening with powerful drilling and hammer drilling capability in a compact, system‑ready package. This set pairs the TID 18 cordless impact driver with the TPC 18 QUADRIVE cordless percussion drill...- $149.70
$499.00- $149.70
- Unit price
- per
-
Smart Clamper Portable Vise
The Sjöbergs Smart Clamper Portable Vise provides secure holding when a full-size woodworking bench or fixed vise is not available. Made from solid Beech and fitted with steel guide rods, it gives woodworkers a stable clamping solution that mounts to almost any work surface...- $54.00
$179.99- $54.00
- Unit price
- per
-
Roundover Bit HW R3‑OFK 500 Z1
The Festool Roundover Bit HW R3‑OFK 500 Z1 is designed for clean, controlled edge profiling on small and delicate workpieces. It is optimized for use with the OFKC 500 cordless edge router, delivering smooth, consistent round‑over results on solid wood and plastic edge banding...- $13.50
$45.00- $13.50
- Unit price
- per
-
Ionic Drive 1/2" High Speed Hammer Drill - 20V With Battery and Charger Kit
Kreg 20V Ionic Drive™ 1/2" High Speed Hammer Drill delivers exceptional speed, torque, and safety for demanding drilling and driving applications. Producing over 1,000 in‑lbs of torque and featuring Boost Mode for speeds up to 2,500 RPM, this high‑performance drill is built for builders...- $45.00
$149.99- $45.00
- Unit price
- per
-
Edge Trimming Cutter D22/8 OFK
The Festool Edge Trimming Cutter HW/KLS D22/8‑OFK is built for fast, accurate flush trimming of edge banding on both solid wood and plastic materials. It delivers clean edges with minimal setup time and consistent control at the router. The collet‑free hollow‑shaft design mounts directly...- $23.70
$79.00- $23.70
- Unit price
- per
-
15BHH PLNR 3HP 1PH 230V
The Powermatic 15BHH Planer PM1-477 is a heavy-duty wood planer built for consistent surfacing in demanding shops. Powered by a 3 HP motor on 230V single phase, it delivers steady feed and clean material removal across hardwoods and softwoods without stalling under load. A...- $1,320.00
$4,399.99- $1,320.00
- Unit price
- per
-
Rabbet Depth Stop
The Festool Rabbet Depth Stop pairs with the Festool HLC 82 cordless planer for precise rabbet depth control. It allows you to set a defined depth before planing, so material removal stops exactly where you want it, reducing rework and helping maintain consistency across...- $8.70
$29.00- $8.70
- Unit price
- per
-
Ultra-Shear Carbide Turning Tool - Full Size Square
The Woodpeckers Ultra-Shear Turning Tool with Square Carbide Insert is built for aggressive stock removal with control that stays predictable from start to finish. It is designed for woodturners who want fast material reduction without the downtime of sharpening traditional tools. The square Ultra‑Shear...- $45.00
$149.99- $45.00
- Unit price
- per
-
Roundover 2 Cutter - 3/16" (5 mm)
The Festool 3/16" Roundover Bit HW R5‑OFK 500 is built for controlled edge profiling on solid wood and plastic edge banding using the Festool OFK 500 trim router. It produces a smooth R5 round‑over that softens edges evenly while maintaining a consistent profile across...- $17.70
$59.00- $17.70
- Unit price
- per
-
Adjustable Bench Vise - Model AV25
The Sjöbergs Bench Vise AV‑25 is a compact adjustable woodworking vise designed for new workbench builds or as a replacement vise on existing benches. Sized smaller than the Elite Vise, it delivers controlled clamping in shops where space, alignment and long‑term reliability matter. Reducing...- $157.20
$523.99- $157.20
- Unit price
- per
-
Linkable LED Shop Light - 4500 Lumens - 48"
The MaxLite® Shop Light is designed to replace traditional fluorescent fixtures in both residential and commercial applications. The 48" LED light includes a built-in on/off pull chain, is linkable up to 4 units, and provides uniform light distribution, making it ideally suited for workshops,...- $9.00
$29.99- $9.00
- Unit price
- per
-
Chamfer Guide Base
The Festool Chamfer Adaptor FNS-HLC 82 adds controlled chamfering capability to the HLC 82 cordless planer, allowing you to break edges consistently without switching tools. It mounts directly to the planer and provides a stable reference surface that keeps chamfers even and predictable across...- $14.70
$49.00- $14.70
- Unit price
- per
-
RED TAIL Offset Ruler
The RED TAIL Offset Ruler is a precision layout tool designed to support accurate measuring and marking for cabinetry, panel work, and general woodworking projects. Its flat‑edge locking slider expands the ruler’s functionality beyond standard measurement, allowing it to serve as an offset guide,...- $9.00
$29.99- $9.00
- Unit price
- per
-
Roundover 2 Cutter - 1/8" (3 mm)
The 1/8" Festool Roundover Bit HW R3‑OFK 500 is designed for controlled edge profiling on solid wood and plastic edge banding using the Festool OFK 500 trim router. It cuts a smooth R3 round‑over that softens edges cleanly and leaves a consistent finished profile...- $17.70
$59.00- $17.70
- Unit price
- per
-
Roundover Bit HW R1‑OFK 500 Z1
The Festool Roundover Bit HW R1‑OFK 500 Z1 is designed for clean, controlled edge profiling on small and delicate workpieces using the OFKC 500 cordless edge router. Its single‑cutter design helps manage heat buildup during routing, producing smooth, consistent round‑over edges with minimal surface...- $13.50
$45.00- $13.50
- Unit price
- per
-
Battery Packs with TLC6 Rapid Charger 18 Li 5.0 HP‑ASI
The Festool Energy Set 18 2xHP5.0/TCL 6 delivers dependable, high‑output power for getting started with Festool cordless tools or expanding an existing 18V system. Built around proven Li‑HighPower battery technology, this set balances strong runtime, fast charging, and everyday versatility in a compact, ready‑to‑work...- $56.70
$189.00- $56.70
- Unit price
- per
-
Trim Router Circle Guide
The Kreg Trim Router Circle Guide KRTCG100 allows a trim router to cut accurate circles and smooth arcs with controlled, repeatable results. It controls the router’s pivot point to produce clean, repeatable radius cuts without freehand variation. The clear base plate improves visibility of...- $15.00
$49.99- $15.00
- Unit price
- per
-
Roundover 2 Cutter - 15/32" (4 mm)
The Festool 15/32" Roundover Bit HW R4‑OFK 500 is designed for clean, controlled edge profiling on solid wood and plastic edge banding using the OFK 500 trim router. It produces a smooth R4 round‑over that softens edges evenly while maintaining a consistent profile across...- $17.70
$59.00- $17.70
- Unit price
- per
-
Rare-Earth Magnets - 3/4" Diameter x 1/8" Thick - 6 Piece Set
Step up to serious holding strength with the 3/4" Highpoint Rare Earth Magnet Set. Built for heavier-duty applications, these powerful neodymium magnets deliver a firm, dependable hold—perfect for shop fixtures, custom clamps, and tough storage setups. Features: Neodymium magnet material provides strong holding power...- $6.00
$19.99- $6.00
- Unit price
- per
-
Dust Separator
The Kreg Dust Separator keeps dust and debris from reaching your shop vacuum filter, helping maintain steady airflow during sanding, routing and sawing. A 90‑degree swivel top elbow allows the hose to rotate freely for smoother routing and fewer kinks. Separating debris at the...- $18.00
$59.99- $18.00
- Unit price
- per
