Specials
-
Ultra-Shear - Universal Detail Tip - Radius Tip
The Ultra-Shear Universal Detail Insert – Radius Tip is designed for controlled shaping in smaller areas on a woodworking lathe. Its compact size allows more precise positioning, and the radiused point moderates how the edge engages the material during detail work. The insert uses...- $6.30
$20.99- $6.30
- Unit price
- per
-
T-4 Knife Bundle Sharpening System
The T-4 Knife Bundle brings together the Tormek T-4 Original, the KJ-45 Centering Knife Jig and the SVM-00 Small Knife Holder in one complete knife sharpening setup. If you’ve been piecing together a system, stop. This is the smart buy. The T-4 is compact...- $183.90
$613.00- $183.90
- Unit price
- per
-
Nordic Pro 1400 Woodworking Bench
The Sjöbergs Nordic Pro 1400 Woodworking Bench is built for woodworkers who demand serious holding power in a compact footprint. Made in Sweden from European Beech, this bench combines mass, rigidity and flexible vise placement to support precise handwork and controlled clamping in smaller...- $352.50
$1,174.99- $352.50
- Unit price
- per
-
TYTON Pro-Trac
The TYTON Pro‑Trac is a multifunction layout tool designed for precise angle setting and repeatable layout work. It combines stacked protractors into a compact tool that supports accurate marking, center finding, and angle measurement for woodworking projects. Features: Designed by woodworker Izzy Swan Built‑in...- $27.00
$89.99- $27.00
- Unit price
- per
-
Pizza Cutter Turning Kit - Chrome - 4"
Ditch the flimsy cutters and step up your slicing game with the WoodRiver® Chrome Pizza Cutter Kit. This well-balanced, heavy-duty pizza cutter features a sharp 4" stainless steel blade that’s built to handle everything from thin crust to deep dish with ease. The kit...- $8.10
$26.99- $8.10
- Unit price
- per
-
xTool F2 Ultra UV Standalone
The xTool F2 Ultra UV 5W UV Laser Engraver gives woodworkers and makers access to a cold light engraving system that handles materials traditional lasers struggle to process. It expands production capability across glass, acrylic, ceramics and plastics without introducing heat damage that limits...- $1,289.70
$4,299.00- $1,289.70
- Unit price
- per
-
VAC-PLATE Vacuum Pump Conversion Plate
The VAC‑PLATE is a conversion accessory designed to connect with all versions of the GRABO lifting tool, expanding its functionality for shop and jobsite use. By adapting the GRABO into a vacuum pump configuration, the VAC‑PLATE supports additional vacuum‑based holding and accessory applications. A...- $36.00
$119.99- $36.00
- Unit price
- per
-
VAC-PUC Vacuum Powered Holding Device - 2 Piece
The VAC‑PUCs are negative‑pressure holding devices designed to mount directly to a work surface for versatile, obstruction‑free work holding. By securing materials without clamps in the work area, they help streamline layout, machining, and routing operations where clear access to the workpiece is important....- $39.00
$129.99- $39.00
- Unit price
- per
-
Draw File - Half-Round - Medium Cut
The Iwasaki Draw File Half‑Round Medium Cut is built for controlled smoothing and fine shaping using a pull stroke rather than a push. With an overall length just over 8" and grips at both ends, it is guided with two hands while the exposed...- $7.50
$24.99- $7.50
- Unit price
- per
-
Draw File - Flat - Medium Cut
The Iwasaki Draw File Flat Medium Cut is designed for controlled smoothing and fine shaping where surface quality matters as much as accuracy. Used by pulling the file toward the user, it offers more feedback and control than a traditional push file, making it...- $7.50
$24.99- $7.50
- Unit price
- per
-
RED TAIL Ruler Set
The RED TAIL Ruler Set includes three precision rulers in 4", 6", and 12" lengths designed to support accurate measuring, marking, and layout tasks. Built for versatility, each ruler is interchangeable with other Swan Tool Group layout tools, allowing users to configure their measuring...- $12.00
$39.99- $12.00
- Unit price
- per
-
Draw File - Half-Round - Bastard Cut
The Iwasaki Draw File Half‑Round Bastard Cut is designed for controlled wood shaping using a pull stroke rather than a push. As you draw the file toward the body, it provides direct feedback and steady control when removing material during fitting, tuning and general...- $7.50
$24.99- $7.50
- Unit price
- per
-
20V Ionic Drive™ Wet/Dry Vac HEPA Replacement Filter
Kreg 20V Ionic Drive™ Wet/Dry Vac HEPA Replacement Filter keeps your vacuum performing at peak efficiency with high‑efficiency filtration designed specifically for the Ionic Drive Wet/Dry Vac with HEPA. This genuine replacement filter captures 99.97% of airborne particles 0.3 microns and larger, helping reduce...- $4.50
$14.99- $4.50
- Unit price
- per
-
Spiral Blade - Replacement for HLC 82 Spiral Cutterhead
The Festool Spiral Blade HW 82 SD HLC 82 is a direct replacement blade for the HLC 82 spiral cutterhead, built to restore clean, controlled planing with minimal interruption. Consistently delivering superior cuts, this blade maintains the cutterhead’s shear‑cutting action for smoother output and...- $13.50
$45.00- $13.50
- Unit price
- per
-
Bearing Guide D22 OFK
The Festool Bearing Guide KLS‑D22‑OFK is a replacement bearing designed to restore clean, controlled flush trimming when working with the HW D 22/8‑OFK edge trimming router bit. It provides a stable reference surface that keeps the cutter aligned tight to the workpiece edge, reducing...- $8.70
$29.00- $8.70
- Unit price
- per
-
Little Wizard 2.5 Woodworking Metal Detector
The Little Wizard 2.5 is a handheld metal detector designed specifically for woodworkers who work with reclaimed or unknown stock. It locates hidden nails, screws and other metal before they reach cutting edges, reducing the risk of damaged blades and interrupted work. Its compact...- $11.99
$39.95- $11.99
- Unit price
- per
-
9' x 108" Industrial Edge Sander - Model 6318.001
The 9” x 108” Oscillating Edge Sander by Oliver Machinery gives woodworkers the surface control and material removal needed for accurate edge sanding on large parts. With a full 9” x 108” oscillating belt and 3 HP motor, this machine maintains consistent contact across...- $1,320.00
$4,399.99- $1,320.00
- Unit price
- per
-
Ionic Drive 3/8” Compact Impact Wrench - 20V With 2AH Battery and Charger Kit
Kreg 20V Ionic Drive™ 3/8" Compact Impact Wrench delivers impressive power and precision in a lightweight, easy-to-handle design built for serious shop and jobsite work. With up to 275 ft-lbs of breakaway torque and four selectable speed modes—including smart Assist Mode—this compact impact wrench...- $39.00
$129.99- $39.00
- Unit price
- per
-
51" Replacement Flex Shaft Kit for GM150-UT
Replacement Flex Shaft Kit for the BRAVOPRODIGY GM150‑UT Ultra Flex Shaft Tool (#198333) restores smooth power transfer and control when the original shaft assembly wears out. It is intended for woodworkers and makers who rely on consistent flex shaft performance from their GM150‑UT system...- $16.50
$54.99- $16.50
- Unit price
- per
-
Impact Driver and Drill Set TID 18 Basic‑Set T18
The Festool Impact Driver and Drill Set TID 18 Basic‑Set T18 pairs two of the most frequently used fastening tools into a compact, system‑ready kit designed for efficient shop and jobsite workflows. Combining the TID 18 cordless impact driver with the T18+3 cordless drill,...- $134.70
$449.00- $134.70
- Unit price
- per
